EFFI-Flex-BL is commonly used in linear backlight mode to show the outline of the parts to be checked. However, it can also be used as very diffused directional lighting.
It is above all a lighting for linear camera, allowing the control of paper, glass, transparent material ... It is adaptable wavelength (from blue to IR), compact and practical to fix.
- Build your part number -
|Number of LED||Available wavelengths (nm)|
|Available options||Refer to the detailed information below for any specific reference (with options, customized, ...).|
|XXXX : Optical lengths (mm)||100||200||300||400||500||In steps of 100||Max 2900*|
* In standard time. For any length beyond (Up to 6m): Contact Effilux
Part number : EFFI-FLEX-BL-XXXX...
|Farbe||● Blau||● Grün||● Rot||●IR||○ Weiß
(T°= 5500K ± 500K)
|ZZZ : Wellenlänge (nm)||465||525||625||850||000|
Bezeichnung : EFFI-FLEX-BL-XXXX-ZZZ
These measurements were taken on an EFFI-Flex-BL with an optical length of 200mm.
The cylindrical lens option improves collimation (concentration of the luminous flux), making it possible to increase the luminance on the exit glass by a factor of 20: the illuminated area becomes then finer.
Part number : EFFI-FLEX-BL-XXXX-ZZZ-TR-LS-CYL
CYL : internal cylindrical lens accessory
EFFI-FLEX-BL-CYL is offered with a transparent window and a default linescan accessory (LS): see EFFI-FLEX Standard.
The Zebra mask is used at EFFILUX in metrology and deflectometry to reveal defects (scratch, impact, or positioning ...) on reflective, transparent surfaces , or semi-transparent ... For more information on these applications, please refer to this page.
The EFFE-Flex-BL with zebra mask allows transmission control of a transparent surface (glass, plastic, ...). The defect will be revealed in white on black on the shot.
Référence : EFFI-FLEX-BL-XXXX-ZZZ-MMM
If zebra option, add -MMM(4mm, 5mm, ...) in the reference.
Die Zeichnungen und das Gewicht der Produkte finden Sie auf der Seite mit den technischen Unterlagen.
|Sealing||"Openable" body||Water cooling possible
(For high power)
|Stainless steel version
The EFFI-Flex-BL is supplied directly at 24V DC via an M12 - 4 pins, or M12 power 4 - pins, depending on the power consumption of the product. Attention, the AIC pin must be connected.
|Pin number||Description||Cable color|
Refer to technical sheet for details of the electrical consumption of each EFFI-Flex-BL.
EFFI-Flex-BL is powered by a 24V DC source.
By using the AIC pin, the light intensity can be increased linearly:
• 0V - OFF
• 24V - Full ON
Version Power ("PWR")
If Power version, add -PWR at the end of the reference.
Part number: EFFI-FLEX-BL-XXXX-ZZZ-PWR
For all other inquiries, please contact EFFILUX.